Setup - Grundfos Conex DIA-1 Montage- Und Betriebsanleitung

11.5 Setup

All standard settings of the device can be defined in
the "setup" menu. During initial commissioning, basic
functions are configured which after that should only
be altered rarely or even not at all.
11.5.1 Selection of measured values for chlorine, chlorine dioxide, ozone, peroxide, peracetic acid, pH,
redox
setup
parameters
chlorine
chlorine dioxide,
ozone
pH
redox
Fig. 26 Selection of measured value in "parameter" menu
28
on
pH internal
pH
(electrode)
pH external
pH
off
on
temp.meas.
on/off
temp.meas.
on/off
temp.meas.
on/off
The "setup" menu can only be accessed by persons
having full rights.
See section 11.5.7 Code function.
Enter the code number.
pH compensation
chlorine on/off
on
temp.meas.on
/off
on
temp.comp.chlorine
on/off
on
temp.comp.pH
on/off
on
pH compensation
chlorine on/off
on
temp.meas.
on/off
temp.comp.chlorine
on
on/off
temp.meas.
on/off
temp.comp.chlorine
on/off
on
temp.comp.
on/off
on
temp.comp.
on/off