Herunterladen Inhalt Inhalt Diese Seite drucken

Dmx Channel Assignment Mode 1 And Mode 2 - JB-Lighting P18 Wash MK2 Serie Handbuch

Vorschau ausblenden Andere Handbücher für P18 Wash MK2 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

P1 8 Wash MK2

7.2 DMX channel assignment Mode 1 and Mode 2

M1
M2
Function
Pan (X) movement 546.74°
1
1
Pan (X) fine (16 Bit)
2
2
3
3
Tilt (Y) movement 281.16°
4
4
Tilt (Y) fine (16 Bit)
5
5
Control channel
To enable uniform dimming manually via faders for all light mixing consoles, 5 diffe-
rent settings for the DMX smoothing are available. If the DMX signal is interrupted or
too few packets are sent on some DMX consoles, the response of the Sparx 18/30
can be adjusted with this channel. The Minimum DMX Smoothing setting should
work on most popular consoles. The values for DMX smoothing must be permanent.
For the other values, such as cooling mode, color temperature, zoom modes, camera
mode, reset, the values must be applied for 2 seconds, then the device will be per-
manently switched (Same setting as in the PERSONALITY menu).
Setting for minimal DMX smoothing
(A dimmed shutter sequence is possible)
Dimmer fade out via fader (fast - slow)
not used
Setting for minimum / medium DMX smoothing
Dimmer fade out via fader (fast - slow)
not used
Setting for medium DMX smoothing
Dimmer fade out via fader (fast - slow)
not used
Setting for medium / maximum DMX smoothing
Dimmer fade out via fader (fast - slow)
BACKLIGHT MODE - Display backlight configuration
AUTO - the fixture controls the backlight automatically
ON - the backlight is always on
OFF - the backlight is always off until a key is pressed
DISPLAY ORIANTATION - display flip or not
STANDARD - the display can be read when the headlamp is on a surface
FLIP - the display orientation is rotated by 180 °, hanging readable
not used
MAIN SCREEN MODE - view of the main screen
STANDARD - the main screen displays the DMX address, the DMX mode, and when
wireless is enabled, the field strength.
USER FIXTURE ID - the main screen displays the user definable fixture ID / head-
light number
not used
USER FIXTURE ID SET - Scheinwerfernummer setzen
SET - the USER ID can be set. The headlamp takes the 16-bit value of Pan for the
USER ID
not used
- 20 -
DMX
000-255
000-255
000-255
000-255
000-007
008-031
032-039
040-063
064-071
072-095
096-103
104-104
105-105
106-106
107-107
108-108
109-109
110-110
111-111
112-112
113-113
114-127

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis