Storage - Silvercrest HG04476 Montage-, Bedienungs- Und Sicherheitshinweise

Do not obstruct the ventilation
slots during operation . A
blocked ventilation circuit
can result in overheating and
damage to the product .
Cleaning and storage
Do not pull the charger out
of the wall outlet by the
connection cord .
Protect the charger against
dust, direct sunlight, dripping
and splashing water . Protect
the product against dust and
direct sunlight .
Store the product in a cool,
dry place, protected from
moisture and out of the reach
of children .
Protect the product against
heat .
Do not place the product close
to open flames or heat sources
such as stoves or heating
appliances .
˜ Before first use
Remove all packaging materials . Check if all
parts are complete .
NOTE: The product's built-in battery is not
charged on delivery . Charge the battery
completely before first use (see "Charging
the product" section) .
˜ Assembly
˜ Product assembly
Push the vacuum attachment 1 onto the
suction head 12 .
Place the assembly on the motor unit 9 .
˜ Attaching the wiper
NOTES:
Prior to assembling the wiper 4 , fill the
water container 6 with water and/or
cleaning detergent .
Do not use abrasive or aggressive cleaning
detergents . These could damage the product .
Do not exceed the water container's 6
maximum capacity of 360 ml .
Screw the wiper 4 onto the water
container 6 .
Unfasten the hook-and-loop strap on one
side of the microfiber cover 3 .
Place a microfiber cover 3 on the wiper 4 .
Fasten the hook-and-loop strap of the
microfiber cover 3 .
GB 11