Atag CM4411 Anleitung Seite 134

MAINTENANCE
EN 26
The factory setting is TEMPERATURE HIGH. You can change this as
follows:
1. Press the MENU button and press the scrolling buttons < or >
until the menu option TEMPERATURE appears. Confi rm the menu
option with the OK button.
2. The display shows the current setting. Select another temperature
with the scrolling buttons < or >. When the desired temperature is
displayed, confi rm it with the OK button.
Setting the switch-off time
If the appliance is not used for a while, it switches itself off
automatically for safety and energy saving reasons. You can choose
between 3 switch-off times:
• AUTO SHUTOFF TIME 1 H
• AUTO SHUTOFF TIME 2 H
• AUTO SHUTOFF TIME 3 H
You can change this as follows:
1. Press the MENU button and press the scrolling buttons < or >
until the menu option AUTO SHUTOFF TIME appears. Confi rm the
menu option with the OK button.
2. Select another switch-off time with the scrolling buttons < or >.
When the desired switch-off time is displayed, confi rm it with the
OK button.
Carrying out the descaling program
When the display shows PLEASE DESCALE!, the appliance must be
descaled.
1. Insert the hot water nozzle (fi g. 32).
2. Press the MENU button and press the scrolling buttons < or >
until the menu option DESCALE appears. Confi rm the menu option
with the OK button.
3. The display shows DESCALE NO. Press the scrolling button <, and
the display shows DESCALE YES. Confi rm with the OK button. The
descaling program starts.
The top line of the display alternates between ADD DESCALER and
PRESS MENU KEY.
32
4. Empty the water tank and pour in the contents of the bottle of
descaler supplied with the machine and fi ll with fresh water up to
the MAX level. For subsequent descaling operations, descaling solu-
tion can be purchased from authorised technical service centres.