Atag CM4411 Anleitung Seite 126

USE
CLEAN
EN 18
Making cappuccino
1. Follow the steps described in (see "Making cappuccino or hot milk"
on page 16 and 17)!
2. Swing the milk dispenser pipe out and place a suffi ciently big cup
underneath the coffee dispenser and the milk dispenser pipe
(fi g. 20).
3. Select the desired coffee strength for the cappuccino with the
"coffee strength" knob (see "Preparing coffee" on page 10). The cup
size on the top line (e.g. ESPRESSO CUP) has no meaning here, as
20
the amount of coffee made is fi xed in the CAPPUCCINO PROGRAM
menu.
4. Press the "cappuccino" button once. Hot and frothy milk, then
coffee, are dispensed into the cup. The top line of the display shows
CAPPUCCINO and the bottom line shows a progress bar and
percentage.
The amount of milk and coffee is preset to normal quantities.
You can change and save these to suit your taste, see "Setting
the cappuccino program" on page 20. The display shows the last
selected coffee setting.
Frothing/heating up milk
1. Follow the steps described in see "Making cappuccino or hot milk"
on page 16 and 17!
2. Swing the milk dispenser pipe out and place a suffi ciently big cup
underneath the coffee dispenser and the milk dispenser pipe
(fi g. 20).
3. Press the "cappuccino" button twice (within 2 seconds of each
other). Hot and frothy milk is dispensed into the cup. The top line of
the display shows MILK FROTHING and the bottom line shows a
progress bar and percentage.
The amount of milk is preset to normal quantities. You can change
and save these to suit your taste, see "Setting the cappuccino
program" on page 20. The display shows the last selected coffee
setting.