Jacuzzi J-300 Montageanweisung Und Bedienung Und Wartung Seite 35

trical supply to the minipool. In this way, the iPod enters first
"pause" mode and subsequently, 2 minutes later, "sleep" mode.
NOTE: whilst the iPod is connected to the connector, it can-
not be directly switched on or turned off from the iPod itself.
To disconnect it, wait until the message
iPod display.
Battery charging
When connected to the connector, the iPod automatically charges.
Changing to iPod mode
Press the MODE (9) key to change to iPod mode.
will appear on the display followed by
Files saved on the iPod will automatically be listed. Press down the
"Mode" key to change to a different mode.
Searching for favourite tunes
In play mode, press the BAND key to enter "search" mode. Press
down the BAND key to access the various search methods:
- song title
- name of artist
- album title
- genre
After having selected the search method, press the AUDIO key
within 10 seconds, and using the (+) or (–) volume keys, move
around the menu. Press the AUDIO key to confirm and play the
selected track. During the search, press the AS/PS key to rap-
idly move to the next level.
- Reset button (Not Illustrated): After releasing the front pa-
nel, use a pencil or any nonmetallic object to press and hold the
reset button for five seconds to reset the main unit and the unit will
return to the factory default settings.
3. Top Button: Has no function.
4. Mute Button: Press Mute to mute audio output. The word
Mute flashes on the display panel. Press again to return to pre-
vious volume level.
5. Menu Function List Button: Press Menu to navigate th-
rough the list of stereo performance functions. Steps to access
menu items:
- To access the MENU press the Menu button < 3 seconds;
"MENU" will be displayed for 2 seconds, and then "CONTRA-
ST" will appear on the display.
- To navigate through the menus use the
press the MENU button repeatedly..
- To adjust the selected menu item, press the VOLUME Up (7)
or Down (8) buttons.
- After the selected menu item(s) has been changed and no
other buttons have been pressed within the 5 second time-out,
the unit will resume to the previous operation.
Contrast: "CONTRAST 5" will be displayed by default. The u-
ser now has 5 seconds to press the VOLUME Up or Down but-
tons to adjust from 0 – 10.
Dimmer: The dimmer feature of the display is set to "DIMMER
High" by default. Use the Volume Up or Down buttons to adju-
st the Dimmer level between High or Low.
Distant/Local: "Distant" is the default setting. User now has
5 seconds to adjust with the VOLUME Up or Down buttons from
appears on the "Distant" (a broader range of signals) to "Local" (only strong lo-
OK to disconnect
cal stations). This feature is used to designate the strength of
the signals at which the radio will stop during automatic tuning.
Area: allows you to select the geographical area of radio transmis-
sion origins, USA or EUROPE ("LATIN" and "ORIT" are not used).
Interamp On/Off: Feature is not used.
Programmable Turn-on Volume: "VOL PGM 12" is the de-
fault setting. User now has 5 seconds use the VOLUME Up or
. Down buttons to program the turn on volume.
Beep Tone: "ON" is the default setting. User now has 5 seconds
to adjust by pressing the VOLUME Up or Down buttons from
"ON" to "Off".
6. Audio/Enter Button: Press Audio/Enter to navigate th-
rough the stereo sound functions. Short press "AUDIO" button
to access the audio menu. User can navigate thru the audio me-
nu items by pressing the "AUDIO" button repeatedly, or by pres-
sing the Tuning Up
sired menu item appears on the display, adjust that option by u-
sing the Volume Up (7) or Down button (8) within 5 seconds.
NOTE: The unit will automatically exit the Audio Menu after fi-
ve seconds of inactivity.
VOLUME (Volume Level): User has 5 seconds to use the Vo-
lume button to adjust the desire volume level, the volume level
will be shown on the LCD display ranging from 00 (lowest) to
46 (highest).
iX-BASS (iX-Bass Level): User has 5 seconds to use the Vo-
lume Up or Down button to select the 3 different Bass Boost le-
vel: Low, Mid, or High.
BASS (Bass Level): User has 5 seconds to use the Volume Up
or Down button to adjust the desired Bass level range from -6
to +6.
BASS -CFQ (Bass Center Frequency): User has 5 seconds
to use the Volume Up or Down button to adjust the desired Bass
Center Frequency to 60Hz, 80Hz, 100Hz, or 200Hz.
BASS-Q: (Bass Quality Factor): User has 5 seconds to use
the Volume Up or Down button to adjust the desired Bass Qua-
lity Factor to 2N, 1N, 1W or 2W.
or buttons or
MIDDLE (Middle Level): User has 5 seconds to use the Vo-
lume Up or Down button to adjust the desired Middle level ran-
ge from -6 to +6.
35
or Tuning Down Button . Once the de-