Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk-Advance SWEEPER SR 1000S P Betriebsanleitung

USER MANUAL

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all
necessary information to use the machine properly in a safe
and autonomous way. It contains information about technical
data, operation, storage, maintenance, spare parts and
safety.
Before carrying out any procedure on the machine, the
operators and qualified technicians must read this Manual
carefully. Contact Nilfisk-Advance in case of doubts regarding
the interpretation of the instructions and for any further
information.

TARGET

This Manual is intended for operators and technicians
qualified to perform the machine maintenance.
The Operators must not carry out operations reserved for
qualified Technicians. Nilfisk-Advance will not be answerable
for damages coming from the non-observance of this
prohibition.

HOW TO KEEP THIS MANUAL

The User Manual must be kept near the machine, inside an
adequate case, away from liquids and other substances that
can cause damage to it.

CONFORMITY CERTIFICATE

Figure A shows the documentation certifying the sweeper
conformity with the law in force.
NOTE
Two copies of the original EC Declaration of
Conformity are provided together with the
machine documentation.
2

IDENTIFICATION DATA

The machine model and serial number are marked on the
plate (1, Fig. U) applied on the frame and can be read by
lifting the hood (4).
The machine model year is written in the EC statement and it
is also indicated by the first two figures of the machine serial
number.
The petrol engine serial number and model are marked in the
positions (2 and 3, Fig. U).
This information is useful when ordering machine spare parts.
Use the following table to write down the machine and engine
identification data for any further reference.
MACHINE model ............................................................
MACHINE serial number ...............................................
ENGINE model ...............................................................
ENGINE serial number ...................................................

OTHER REFERENCE MANUALS

Petrol Engine Manual, supplied with the machine, which is to
be considered an integral part of this Manual.
Moreover, the following Manuals are available:
– Spare Parts List (supplied with the machine)
– Service manual (that can be consulted at
Nilfisk-Advance Service Centers)

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures
must be carried out by qualified personnel or by
Nilfisk-Advance Service Centers. Only original spare parts
and accessories must be used.
Contact Nilfisk-Advance for service or to order spare parts
and accessories, specifying the machine model and serial
number.

CHANGES AND IMPROVEMENTS

Nilfisk-Advance constantly improves its products and
reserves the right to make changes and improvements at its
discretion without being obliged to apply such benefits to the
machines that were sold previously.
Any change and/or addition of accessory must be approved
and performed by Nilfisk-Advance.
146 1960 000(2)2006-06 A