Technical Data And Operating Limits; Maximum Verification Scale Interval; Maximum Permissible Load; Ambient Conditions - Mettler Toledo PTA Serie Bedienungsanleitung

A
B
C
10

Technical data and operating limits

5 Technical data and operating limits
5.1

Maximum verification scale interval

The verification scale interval depends on the load cell and scale configuration. The
maximum verification scale interval is given below.
Max. verification
scale interval [e]
3 x 3000 e
Multi Range
max / e [kg]
1 x 6000 e
Single Range [kg]

5.2 Maximum permissible load

All weighing platforms are equipped with an overload protection. However, if the load
exceeds the maximum permissible load, damage of mechanical parts may occur.
The static load-bearing capacity, i.e. the maximum permissible load, is dependent on the
type of loading (positions A – C).
Capacity
Position
A central load
B side load
C one-sided corner load

5.3 Ambient conditions

The weighing platform and the gas pressure springs of the raisable weighing platforms
may only be operated in the range of –10 °C to + 40 °C / 14 °F to 104 °F.

5.4 Digital weighing interface specification (safe area only)

Interface type
Interface protocol
Max. cable length
Capacity
300 kg 600 kg 1200 kg
150 / 0.05
– 300 / 0.1
600 / 0.2
0.05 0.1 0.2
300 kg
700 kg
350 kg
185 kg
RS422
SICSpro
20 m
1500 kg 3000 kg
300 / 0.1 600 / 0.2
– 600 / 0.2 1500 / 0.5
1500 / 0.5 3000 / 1.0
– 0.5
1500 kg
600 kg 3000 kg
1800 kg 3300 kg
900 kg 1900 kg
450 kg 950 kg
PTA-series 30290733C