Front Panel - HP DesignJet T200 Bedienungsanleitung

Use only the electrical cord supplied by HP with the printer. Do not damage, cut, or repair the power cord.
●
A damaged power cord can cause fire or electric shock. Replace a damaged power cord with an HP-
approved power cord.
Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of the
●
printer. Doing so may cause fire, electric shock, or other serious hazards.
For printers without a stand:
●
Use a support strong enough to take at least double the total combined weight of the printer,
–
supplies, and accessories.
Ensure the printer fits fully within the support surface.
–
Ensure that the support is used exclusively for the printer.
–
Follow the assembly instructions that came with the printer, and keep them available to ensure
–
safe usage.
Power off the printer and unplug the power cord from the power outlet in any of the following cases:
●
When placing your hands inside the printer.
–
If there is smoke or an unusual smell coming from the printer.
–
If the printer is making an unusual noise not heard during normal operation.
–
If a piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal parts
–
of the printer.
During an electrical (thunder/lightning) storm.
–
During a power failure.
–
Before servicing the printer.
–

Front panel

The front panel is a touch-sensitive screen with a graphical user interface located on the front left of the printer.
The front panel gives you complete control of your printer. From it you can print, view information about the
printer, change printer settings, perform calibrations and tests, and so on. It also displays alerts (warning and
error messages) when necessary. The following diagram and related table provide a quick reference to the front
panel's features.
2 ENWW