Front Panel - HP DesignJet Z6 Pro Einführende Informationen

Do not use aerosol products that contain flammable gases inside or around the
●
printer. Do not operate the printer in an explosive atmosphere.
Do not block or cover the openings of the printer.
●
Mechanical hazard
The printer has moving parts that could cause injury.
To avoid personal injury, take the following precautions when working close to the printer:
Keep your clothing and all parts of your body away from moving parts.
●
Avoid wearing necklaces, bracelets, and other hanging objects.
●
If your hair is long, try to secure it so that it will not fall into the printer.
●
Take care that sleeves or gloves do not get caught in the printer's moving parts.
●
Do not operate the printer with covers bypassed.
●
If you need to replace the cutter assembly, remember that the cutter has a sharp
●
cutting edge, and take care not to cut yourself.
Internal fan blades are hazardous moving parts. Disconnect the printer before
●
servicing.
Never insert your hands into the printer while it is printing, due to the moving parts
●
inside.
Heavy paper hazard
Special care must be taken to avoid personal injury when handling heavy papers.
Handling heavy paper rolls always requires two people. Care must be taken to avoid
●
back strain and/or injury.
When handling heavy paper rolls, wear personal protective equipment including
●
boots and gloves.
Follow your local Environmental Health and Safety regulations for handling heavy
●
paper rolls.
Ink handling
HP recommends that you wear gloves when handling ink system components.

Front panel

The front panel is a touch-sensitive screen with a graphical user interface; it is located on
the front right of the printer.
The front panel gives you complete control of your printer: from the front panel, you can
view information about the printer, change printer settings, monitor printer status, and
perform tasks such as supplies replacement and calibrations. The front panel displays
alerts (warning and error messages) when necessary.
On the left of the front panel is the power key to turn the printer on or off. The key is
illuminated when the printer is on. It flashes when the printer is in sleep mode.
4 HP DesignJet Z6 Pro/Z9 Pro 64-in Printers
+
ENWW