Front Panel - HP DesignJet T940 Einführende Informationen

Do not use aerosol products that contain flammable gases inside or around
●
the printer. Do not operate the printer in an explosive atmosphere.
Do not block or cover the openings of the printer.
●
Mechanical hazard
The printer has moving parts that could cause injury. To avoid personal injury,
take the following precautions when working close to the printer.
Keep your clothing and all parts of your body away from moving parts.
●
Avoid wearing necklaces, bracelets, and other hanging objects.
●
If your hair is long, try to secure it so that it will not fall into the printer.
●
Take care that sleeves or gloves do not get caught in moving parts.
●
Do not operate the printer with covers bypassed.
●
If you need to replace the cutter assembly, remember that the cutter has a
●
sharp cutting edge, and take care not to cut yourself.
Internal fan blades are hazardous moving parts. Disconnect the printer
●
before servicing.
Never insert your hands into the printer while it is printing, due to the
●
moving parts inside.
Heavy paper hazard
Special care must be taken to avoid personal injury when handling heavy papers.
Handling heavy paper rolls may require more than one person. Care must be
●
taken to avoid back strain and/or injury.
When handling heavy paper rolls, wear personal protective equipment,
●
including boots and gloves.
Follow your local Environmental Health and Safety regulations for handling
●
heavy paper rolls.
Ink handling
HP recommends that you wear gloves when handling ink supplies.

Front panel

The front panel is a touch-sensitive screen with a graphical user interface, located
on the front right of the printer.
4 HP DesignJet T940 Printer Series ENWW