HP DesignJet T200 Bedienungsanleitung Seite 6

The printer wakes from sleep mode and switches on the front-panel display when there is external interaction
with it.
You can use the printer's auto-off feature to turn the printer off automatically. For example, set it to 2 hours and
it turns the printer off after 2 hours of inactivity. In this way, you can save more energy. The auto-off feature is
automatically disabled when the printer is connected to the network to avoid inconveniencing network users.
Mobile Printing
With HP Mobile Printing Solutions you can print from wherever you are, directly from your smartphone or tablet,
in just a few simple steps; use the HP Smart application or send an email to your printer with a PDF attachment.
Enable email printing:
1. Check that your printer is correctly connected to the Internet.
2. Enable Web Services during initial printer setup, or later; touch
front panel instructions. The printer may need to restart if the firmware updates.
Optional step: If you are a printer administrator, you can log into
your printer's email address or manage printer security for remote printing
For the latest information, support, and terms of use of, see
availability).
Front-panel error codes
The printer may occasionally display a system error, which consists of a numerical code followed by the
recommended action that you should take.
In most cases you will be asked to restart the printer, because when the printer starts it can diagnose the issue
better and may be able to fix it automatically. If the problem persists after restarting, you should contact your HP
support representative and be ready to give the numerical code from the error message.
If the error message contains some other recommended action, follow the printer's instructions.
Power specifications
Input voltage
Frequency
Typical power
Maximum input current
Environmental specifications
Operating temperature
Recommended operating temperature for best
performance
Storage temperature
Recommended operating humidity
Storage humidity
4
on the home screen, and follow the
http://www.hpsmart.com
http://www.hpsmart.com
~100–240 V ±10%
50/60 ± 3 Hz
35 W
1.2 A
5 to 40°C (41 to 104°F)
15 to 35°C (59 to 95°F), depending on paper type
-25 to +55°C (-13 to +131°F)
20 to 80% RH, depending on paper type
0 to 95% RH
to customize
(check your region's
ENWW