Accessories - Philips HR1372 Bedienungsanleitung

EnglisH
1
Note: Do not process more than 1 batch without interruption. Let the
appliance cool down to room temperature before continue processing.
 To prevent splashing, set the speed selector to a low setting and
press the normal speed button.
5 After approx. 1 minute, you can press the turbo button to
continue at turbo speed.
cleaning
Do not immerse the motor unit, the whisk coupling unit (HR17
only) and the extra large chopper coupling unit in water.
1 Unplug the appliance.
 Press the release buttons on the motor unit to remove the blender
bar or coupling unit.
 Disassemble the rest of the parts.
Tip: You can also remove the rubber rings from the chopper bowls for extra
thorough cleaning.
 See the separate cleaning table for further instructions.
Environment
Do not throw away the appliance with the normal household waste
,
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 11).

accessories

You can order a direct-driven mini chopper (under service code number
4203 035 83460) from your Philips dealer or a Philips service centre as
an extra accessory for the HR1372, HR1371 and HR1370.
Use the quantities and processing times of the mini chopper for this
accessory.