Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E
2. Operation Types
2.1. Operation Type "Drilling"
à Basic setting: Main switch "0". Barrel in basic setting "up". Lower empty lead cartridge (fig.
A). Push drilling depth ring (20) as far out as possible (max. drill stroke).
à Machine ON: Main switch "1". Barrel in basic setting "up".
à Set reference point: Change LED- display with
to depth display. Use the drilling cross
to lower the tool onto the work piece and zero with
.
à Choose operation type:
Machine starts.
à Choose operating work rpm V
:
A
The drilling depth is now digitally displayed during drilling
. The stop-ring (20) can serve as a
fixed stop.
à Shut machine down:
Special Functions Operation Type "Drilling"
à Torque Limitation: The standard version of GL electronic is equipped with a torque
limitation (0 - 100%) in order to protect sensitive tools from excess strain. Set desired torque at
. If possible, the torque should be selected only at the size at which the tool cuts without
problems.
à Function Pedal switch: For the operation type "drilling" it has the function screw start/stop.
18
201271 D/E
Werbung
