Klarstein Virtuosa EcoAdapt Handbuch Seite 55

2. Touch timer key, "00" will be shown in the timer
display and "0" will blink.
3. Set the time by touching slider control (e.g. "5")
4. Touch timer control again, then "0" will flash.
5. Set the time by touching slider control (e.g. "2"), now the timer you set is
25 minutes.
6. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
7. Buzzer will beep for 30 seconds and the timer
indicator shows "––" when the setting time is
finished.
EN
55