Operation
6
Operation
The device is equipped with an interior LED light which remains on whenever power
is connected. The power consumption of this LED light is extremely low and
insignificant compared to the overall power consumption of the device.
6.1
Before initial use
I
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 17).
6.2
Energy saving tips
• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the device to keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the lid open for longer than necessary.
• Defrost the cooler once a layer of ice forms.
• Avoid unnecessary low temperatures.
6.3
Locking the cooler
➤ Close the lid.
➤ Press the lock (fig. 1 7, page 3) down until it snaps in audibly.
6.4
Securing the cooler in the vehicle
➤ Open the lid of the cooler.
➤ Place the seat belt into the fixing position (fig. 1 3, page 3) of the cooler.
➤ Close the lid.
➤ Fasten the seat belt and tighten it.
12
CoolFreeze CDF11
EN