Operation
6.9
Using the emergency switch
The device is equipped with an emergency switch. Thus you can keep cooling if an
error occurs within the interior electronics.
I
NOTE
During normal operation the emergency switch (fig. 1 12, page 3) has
to be set to the "Normal" position.
➤ If the interior electronics fail: Slide the emergency switch to the "Emergency"
position.
6.10
Switching off the cooler
➤ Empty the cooler.
➤ Switch the cooler off: Press the "ON/OFF" button (fig. 2 1, page 3) for three
seconds.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
6.11
Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the vaporiser. This
reduces the cooling capacity.
Defrost the device in good time to avoid this.
A
NOTICE! Danger of damaging the device!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the cover open.
➤ Wipe off the defrosted water.
16
CoolFreeze CDF11
EN