How To Connect The Earphone; How To Switch On And Adjust The Volume - Beyerdynamic IMS 900 Bedienungsanleitung

Important:
• If you do not use the receiver for several weeks or months, please remove the batteries as
they can leak after some time and damage parts of the receiver. Even "leak proof" batteries
may leak after some time. Damage caused by leaking batteries is not covered under warranty.
• Clean the battery contacts from time to time.
• Please do not throw used battery packs away with your household rubbish, but take them
to your local collection points.
• When using rechargeable batteries use conventional chargers.

2.3.3 How to connect the Earphone

Connect the earphone to the mini stereo jack socket (2). You can use any conventional
earphone or any other audio device.
Note:
Connect to the stereo jack socket (2) an earphone with stereo jack only. If you connect an
earphone/headphone with mono jack, a short circuit can occur and damage the earpho-
ne/headphone.

2.3.4 How to switch on and adjust the Volume

To switch on the receiver turn the on/off switch (1) on top of the receiver clockwise. As soon
as the receiver is switched on, the power indicator (3) will illuminate and the display (7)
indicates the current channel. The channel indicator (7) goes out after 4 seconds to save
power. To increase the volume continue turning the on/off switch (1) clockwise. To decrease
the volume turn the on/off switch (1) anti-clockwise. The volume can be limited with the
limiter switch (10).
34