Indication Of Line Level; How To Adjust Transmitter Frequencies; How To Adjust Stereo Or Mono - Beyerdynamic IMS 900 Bedienungsanleitung

1.4.7 Indication of Line Level

The strength of the line level for each channel input is displayed by LEDs (4) and (5) on the
left hand side next to the LC-Display. In normal operation 3 LEDs are illuminated. With
maximum level 4 should not be exceeded. If the input signal strength exceeds 4, the red
warning LED will glow. The input signal level should be set properly to avoid signal distortion.

1.4.8 How to adjust Transmitter Frequencies

a) Press the up or down button until the LC-Display will show the preset frequency.
b) Press the right or left button. The LC-Display will start to flash.
c) Press the right or left button to select the frequency.
d) Press the up or down button to store the selected frequency.

1.4.9 How to adjust Stereo or Mono

a) Press the up or down button until the LC-Display will show STEREO/MONO ON/OFF.
b) Press the right or left button. The LC-Display will start to flash.
c) Press the left button. STEREO is switched off.
d) Press the right button to switch off MONO and switch on STEREO.
e) Press the up or down button. The LC-Display will stop to flash and the setting is stored.
29