Chapter I Safety Warning - SATA 97820 Bedienungsanleitung

Hydraulic Horizontal Ferro-aluminum Jack Operating instruction:
Product Rated load
（KG）
number
97820 1500
Please inspect the product immediately after unpacking, and ensure that it is intact. If any component is found lost or damaged, please
contact the Customer Service Department of SATA Automotive Technology （shanghai） Co.,Ltd.
Please write down the product serial number:
Note:
If no serial number is available, please write down the date of purchase
Please keep this Operation Instruction properly:
1） As this Operation Instruction covers safety warning, installation, operation, inspection, maintenance and cleaning procedures, etc. of
the product, please properly keep it.
2） Please write down the serial number（or date of purchase）of this jack on the first page of the Operation Instruction, and keep
the Operation Instruction in a dry and safe place for reference.
3） Please use the product correctly on the basis that you have fully understood the information contained herein.
4） The jack is covered with product liability insurance.
5） The jack's performance meets requirements specified in new standard: ASME PALD-2014.

Chapter I Safety warning

1 ） Be sure to carefully read and fully understand the instructions herein before operation and use. Incorrect operation may result in
personal injury and product damage.
2） Carefully check the jack before each use, and do not use it in case of looseness or damage of parts.
3） Select a jack of appropriate deadweight tonnage based on the weight of the vehicle.
97820
Net weight Gross weight
（KG）
14
中文
Highest position
（KG） （MM）
15.5 356
EN DE RU KO PT
Lowest position
（MM）
82 550x240x150
JA ES
Size
（MM）
11