Functional Inspection - Handicare SystemRoMedic FlexiMove Gebrauchsanweisung

FlexiMove
SystemRoMedic
TM
FlexiMove is used to assist transfer and repositioning in various situations. Common situations in which FlexiMove can
be used include transfers, raising and repositioning higher up in bed. FlexiMove features two different handle lengths
to ensure a good working stance for the caregiver. Two materials on the inside: nylon or polyester. Nylon is an anti-slip
material with a surface that is easy to disinfect. Polyester is soft and comfortable.
SystemRoMedic is a series of different models of transfer assistive devices. The choice of assistive devices depends on
the transfer situation and the patient's functional capability and needs.

Functional inspection

Visual inspection
Check the condition and function of the assistive device regularly. Always inspect the product after laundering. Check to
ensure that seams and material are free from damage. Check to ensure that fabric is not worn or faded. If there are signs
of wear, the product must be discarded.
Functional inspection
Test the FlexiMove regularly by stepping on one handle and pulling hard on one of the handles
on the opposite side. Repeat the procedure until all of the handles have been tested.
Using FlexiMove
SystemRoMedic
M A N U A L
TM
Transfer:
For transfers between e.g., wheelchair and bed, an EasyGlide should also be used, in some
cases, even an EasyBelt/FlexiBelt.
English
3