Using The Cooking Timer - Atag HIDD8471EV Bedienungsanleitung

OPERATION OF THE HOB

Using the cooking timer

The cooking timer is connected to a cooking zone. After the set time has elapsed, the
cooking zone will switch off automatically.
The hob is switched on and for at least one cooking zone a power level has been set.
1. Touch the desired cooking zone key.
2. Touch the left or right timer key separately.
The timer symbol shows next to the relevant cooking zone.
▷
Only touch the timer key on the right if you want to set a time less then 10 minutes.
▷
▷ The timer's display shows a '-' where you can set a value.
3. Use the slide control to set the desired time (from 1 to 99 minutes).
▷ Set a separate value for each display.
When the time is set, it will begin to countdown.
▷
The timer display will show the remaining time.
▷
▷ The last minute will be displayed in seconds.
The selected cooking zone will switch off automatically once the set time has elapsed.
▷
The alarm beeps after the set time has passed.
▷
4. Touch the left or right timer key to stop the alarm.
The alarm stops automatically after 30 seconds.
▷
All the cooking zones can have a cooking timer that has been set. The display will always
show the time of the cooking zone with the shortest time remaining.
Changing the pre-set cooking time
The cooking time can be changed anytime during the operation.
1. Touch the cooking zone key to select the zone of which you want to adjust the cooking
timer.
A zone connected to the cooking timer is identified by the timer symbol next to the
▷
cooking zone display.
2. Touch the left or right timer key separately.
3. Use the slide control to change the time.
EN 19