Atag HIDD8471EV Bedienungsanleitung Seite 62

POWER LIMITER
6. Touch the cooking zone key on the rear left and choose "8" by using the slide control.
▷ "C" is flashing alternately with "8" on the cooking zone display on the rear left.
7. Touch the cooking zone key on the front left and select the power limitation wanted with the
slide control (see table).
8. Then, touch and hold the On/off key until all the display segments disappear.
The hob is now ready for use with the selected power limiter active.
▷
Setting slide control
0
1
2
1
3
L1
L2
N2
2-2N 230V / 50 Hz 2x16A
1N 220-240V 50/60Hz - 1x 16A
1 fase - 1 nul
1 phase - 1 neutral
1 Phase - 1 Nullanschluss
1 phase et 1 neutre
Aderdoorsnede
Aderquerschnitt
Cross sectional area
Fil diamètre
Max 3500W | setting 2_3
EN 28
Setting of the power limiter
2
3N 380-415V 50/60Hz - 3x 16A
3 fase - 1 nul
3 phases - 1 neutral
3 Phasen- 1 Nullanschluss
3 phases et un neutre
Aderdoorsnede
Aderquerschnitt
Cross sectional area
L3
Fil diamètre
N1
1N 220-240V 50/60Hz - 1x 32A
1 fase - 1 nul
1 phase - 1 neutral
1 Phase - 1 Nullanschluss
1 phase et 1 neutre
Aderdoorsnede
Aderquerschnitt
3x2,5 mm 2
Cross sectional area
Fil diamètre
7400W
4500W
3500W
2800W
2N 380-415V 50/60Hz - 2x 16A
2 fase - 1 nul /
2 phases - 1 neutral
2 Phasen - 1 Nullanschluss /
2 phases et 1 neutre
Aderdoorsnede
Aderquerschnitt
2
5x1,5 mm
Cross sectional area
Fil diamètre
2-2N 230V 50Hz - 2x 16A
2 fase - 2 nullen
2 phases - 2 neutral
2 Phasen - 2 Nullanschlusse
2 phases et 2 neutres
Aderdoorsnede
Aderquerschnitt
3x4 mm 2
Cross sectional area
Fil diamètre
4x1,5 mm 2
5x1,5 mm 2
only NL/alleen NL