Using The Cooking Timer - Atag HIDD074EX Serie Gebrauchsanleitung

Operation of the hob

Using the cooking timer

TIP!
The cooking timer is connected to a cooking zone. After the set time has elapsed, the cooking
zone will switch off automatically.
The hob is switched on and for at least one cooking zone a power level has been set.
1. Touch the cooking zone key of the desired cooking zone.
2. Touch the timer display.
The timer symbol of the active cooking timer lights up brightly.
3. Use the '+' or '-' key to set the desired time (from 1 minute to 9 hours and 59 minutes).
The left position of the timer display shows the hours, the other positions the minutes.
When the time is set, it will begin to countdown and the timer symbol flashes slowly.
The timer display will show the remaining time.
The last 10 minutes will be displayed in minutes and seconds.
The selected cooking zone will switch off automatically once the set time has elapsed.
The timer flashes and the alarm beeps after the set time has passed.
4. Touch the timer display to stop the alarm.
The alarm stops automatically after 2 minutes.
TIP!
All the cooking zones can have a cooking timer that has been set. The display will always show
the time of the cooking zone with the shortest time remaining.
Changing the pre-set cooking time
The cooking time can be changed anytime during the operation.
1. Touch the relevant cooking zone key.
2. Touch the timer display.
3. Use the '+' or '-' key to change the time.
Checking the remaining cooking time
1. Touch the cooking zone key to select the zone of which you want to see the remaining time.
A zone connected to the cooking timer is identified by a flashing timer symbol above the
cooking zone display.
20