Fault Report; Technical Data - Schaudt EBL 226 C +OVP Bedienungsanleitung

Instruction Manual Electrobloc EBL 226 C +OVP
Mains connection
Current consumption
Standby current from
Living area battery
D+ loading
Current-carrying
capacity
12
D

Fault report

In the event of damage, please return the defective device together with the
completed fault report to the manufacturer.
Device type: _______________________
Article no.: _______________________
Vehicle: Manufacturer: _______________________
Model:
Own installation?
Upgrade?
Following fault has occurred (please tick):
- Electrical consumers do not work -- which?
(please specify below)
- Switching on and off not possible
- Persistent fault
- Intermittent fault/loose contact
Other remarks:
E

Technical data

230 V AC ±10%, 47 to 63 Hz sinusoidal, protection class I
1.9 A
Depending on the control and switch panel: approx. 5 -- 20 mA, plus con-
sumption of controller electronics of refrigerator
Measurement approx. 10 minutes after disconnection from the mains:
not connected to mains
F
12.6 V battery voltage
F
Battery isolation not enabled
F
Control and switch panel lighting off
F
12V main switch off
F
Loading of the D+ output of the alternator by the Electroblock approx. 1 mA
without current consumption on D+ point
12V outputs
Date: 30.09.2009
_______________________
Yes - No -
Yes - No -
A maximum of 90% of the
nominal current of the relevant fuse
may be drawn.
811.573 BA / EN