Eaton ATS 30 Installations- Und Bedienungsanleitung Seite 65

IPv6 for ATS-00_EN
Downloaded from www.Manualslib.com
8.6 ATS Command Settings
Command Description
TempF Report internal ATS fahrenheit temperature.
TempC Report internal ATS celsius temperature.
Age Report internal ATS age.
Time Report present time.
Report number of times that ATS has
XCount
transferred.
Serial Report the unit's serial number.
DevID Report the unit's device ID.
Prefer Report the preferred source.
Sens Report the sensitivity.
Mode Report the operation mode.
Vout Report the output voltage.
Report the output current.
Iout
Vs1 Report the primary voltage.
Vs2 Report the secondary voltage.
Fs1 Report the primary frequency.
Fs2 Report the secondary frequency.
Vtp2s Report the primary to secondary trip voltage.
Vts2p Report the secondary to primary trip voltage.
Vbp2s Report the primary to secondary brownout
voltage.
Vbs2p Report the secondary to primary brownout
voltage.
Tdp2s Report the recover time of transfer from
primary to secondary.
Tds2p Report the recover time of transfer from
secondary to primary.
Mvs1 Report the max voltage of comparing cycles
for primary AC blackout.
Report the max voltage of comparing cycles
Mvs2
for secondary AC blackout.
Mts1 Report the max time of comparing cycles for
primary AC blackout.
Mts2 Report the max time of comparing cycles for
secondary AC blackout.
manuals search engine
8. SNMP IPv6 for ATS
Parameter Response
hh:mm:ss MM/DD/YYYY
<Device serial string>
<Device ID string>
S1 or S2
hi or low
Initialization
Diagnosis
Off
S1
S2
Safe
Fault
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#
#
#
#
Page 5