Communication Card - Eaton ATS 30 Installations- Und Bedienungsanleitung

5. Operation
5.2

Communication card

N°
LED indicators
LED
NET LED
NET LED
ATS LED
ATS LED
ATS LED
DIP switch
DIP 1
OFF
OFF
ON
ON
Page 10
Downloaded from www.Manualslib.com
Indicator
NETWORK port
1
LOCAL port
2
RESET button
3
LED indicators
4
DIP switch
5
Condition
OFF
Green
OFF
Amber
Blinking
DIP 2
OFF
ON
OFF
ON
manuals search engine
Description
Connects to the Ethernet Network
Connects to a workstation with an RJ45 to DB9 cable to configure the
system.
Resets InsightPower SNMP IPv6 for ATS (hereafter referred to as SNMP
IPv6). This does not affect the operation of the ATS
NET LED (green) indicates network communication status
ATS LED (yellow) indicates the ATS's communication status.
Sets up operation mode
Meaning
Ethernet is unlinked.
Ethernet is linked.
1. Initialization
2. SNMP IPv6 abnormality
SNMP IPv6 abnormality
Every second Poor connection between the ATS and the SNMP IPv6
Every 50 ms Normal connection between the ATS and the SNMP IPv6
Operation mode Description
Normal mode The built-in SNMP IPv6 provides the ATS's status
information and parameters through a network
system.
Pass through The built-in SNMP IPv6 stops polling the ATS but
mode transfers the communication data between the
"LOCAL" port and the ATS.
- Invalid state
Configuration In this mode, users can login through the "LOCAL"
mode port and configure the built-in SNMP IPv6's settings.
ATS-01_EN