Eaton ATS 30 Installations- Und Bedienungsanleitung Seite 61

8.1
8.2
8.3
IPv6 for ATS-00_EN
Downloaded from www.Manualslib.com
Introduction of SNMP IPv6 for ATS
The SNMP IPv6 for ATS, hereafter referred to as SNMP IPv6, is built in the ATS and is a device that provides
an interface between the ATS and a network. It communicates with the ATS, acquires its information and
remotely manages the ATS via a network system. The SNMP IPv6 supports public protocols including SNMP
and HTTP . Y ou can effortlessly configure this SNMP IPv6 using a network system and easily obtain your
ATS's status and manage your ATS via the SNMP IPv6.
SNMP IPv6 Features
• Network ATS management
Allows remote management of the ATS from any workstation through Internet or Intranet.
• Remote ATS monitoring via SNMP & HTTP
Allows remote monitoring of the ATS using SNMP NMS, Delta MIB (Management Information Base)
or a Web Browser.
• ATS and system function configuration from any client (password protected)
Sets the ATS and system parameters through a Web Browser.
• Event logs & metering data keeping
Provides a history data of the ATS's power events, power quality and status.
• Other features and supported protocols include:
- User notification via SNMP T raps and e-mail
- Network Time Protocol
- T elnet configuration
- BOOTP / DHCP
- HTTPS, SSH, SFTP and SNMPv3 security protocols
- RADIUS (Remote Authentication Dial In User Service) login and local authentication
- Remote event log management through syslog
- IPv6 Ready Logo certified (ID 02-C-000624).
Front view of SNMP IPv6
manuals search engine
8. SNMP IPv6 for ATS
Page 1