Eaton ATS 30 Installations- Und Bedienungsanleitung Seite 64

8. SNMP IPv6 for ATS
8.5 Upgrade
• Upgrade via Web
You can upgrade the SNMP IPv6's firmware or the ATS's firmware through the SNMP IPv6 for ATS Web
(please see the following figure). T he SNMP IPv6 will restart after finishing self-upgrade. If you upload the
ATS's firmware to the Web, you can see the ATS's firmware upgrade progress from the Web.
• Upgrade via FTP/ SFTP
You can also upgrade the SNMP IPv6's firmware or the ATS's firmware by using FTP or SFTP program. Make
sure you upload correct images to upgrade_snmp when upgrading SNMP IPv6's firmware, and upload
correct images to upgrade_device when upgrading the ATS's firmware.
Page 4
Downloaded from www.Manualslib.com manuals search engine
IPv6 for ATS-00_EN