Configuring »Weekly Profile« Time Control Function - Funkwerk elmeg CS410 Bedienungsanleitung

s
Press the appropriate softkeys to configure your de-
sired time control period.
s
Press the »
not active
her.
s
Press the softkey »
within the set time period. Use the »
to be played for callers outside of this time period.
If several announcements are available you can display all saved announcements one af-
ter the other by pressing the »
For example:»
s
Press the »
ON
» « and the corresponding softkey changes to »
ON
Press this softkey to deactivate the weekly profile.
O
Confirm your settings with OK to leave the
Time-controlled menu.
Configuring »Weekly profile« time control function
As an alternative, you can define a weekly profile as the time-control function for the extension num-
bers » «, »
MSN-1 MSN-2
each day during which different announcements are played ( main time).
In the time outside of the selected periods ( »
ment. This announcement is identical for all days defined in the weekly profile. In addition, you can
also assign an operating mode in the weekly profile for the Remaining time that is different than that
for the Main time. For example, you can define that during the Main time messages can be left, while
during the Remaing time it is not possible.
In the menu »
Time-controlled
« softkey to view the configured time periods one after the ot-
« to set the announcement that is to be played to callers
Main time
Remaining
Next announc.
«, »
Anncm.-1 Anncm.-2
« softkey to activate the time-controlled function. The status is switched to
« and » «. In a weekly profile you can assign different time periods to
MSN-3
Remaining
« press the softkey »
Daily/MSN-1:
Main time:
not active
Remaining:
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
« softkey to define the announcement
«softkey.
«, ...., » « or »
Anncm.-9
«.
OFF
Daily/MSN-1:
Main time: Anncm.- 1
13:00 to 13:30
Remaining: Anncm.- 3
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
«) you can configure a different announce-
«.
Weekly prof.
English
Off
Off
(-)
ON
Off
«.
Anncm.-10
On
(2)
OFF
17