Description and Installation
System telephone firmware V4.20 is required to operate this module.
This module provides your system telephone with a multi-function digital answering machine. These
operating instructions describe how to use this module in conjunction with the system telephones el-
meg CS410 and elmeg CS410-U. The software of theses telephones already supports use of an answe-
ring machine module.
The scope of functions offered by the answering machine depends on the software used in the system
telephone. The features described in this operation manual are based on the software status for the
system telephones valid at the time of printing.
Answering machine functions
•
Up to 48 minutes recording capacity for normal speech recordings.
•
Dedicated key for activating and deactivating the answering machine.
•
Extended functions for the call LED. The LED lights up in a different color when the answering
machine is switched on and flashes when new messages are present that have not yet been lis-
tened to.
•
10 announcements, 4 information texts, forwarding announcement, sign-off announcement
and announcement with full answering machine.
•
Dictation recording
•
Individual configuration and polling of message recording possible for each MSN extension
number.
•
Time-controlled announcement for each number (daily), or for the numbers »
»
« (weekly profile).
MSN-3
•
Adjustable recording quality (normal, good, very good).
•
Logging of calls.
•
Listening while a message is being recorded.
•
Remote, PIN-protected polling.
•
Automatic forwarding (relaying) of newly recorded messages by means of a call or a UUS1 or
SMS message.
Contents of package
•
Answering machine module
•
PC-audio cable (3.5 mm stereo plug, approx. 2.5m)
•
Self-adhevise name-plate
•
Operating instructions
Installation
The answering machine module may only be installed by a specialized dealer, or by aut-
horized service personnel.
English
« to
MSN-1
1