Setting The Mode Of Operation; Setting The Call Signal Duration; Selecting An Announcement - Funkwerk elmeg CS410 Bedienungsanleitung

The upper display lines show the status of the answering machi-
ne for the number that has been dialed (»
various settings can then be made on the other lines of the display
using the associated softkeys.
When you press the »
Options
taining other settings. The status for the corresponding function
is shown on the line below the softkey.
Press the C button to quit.

Setting the mode of operation

s
Press the softkey »
ous options are shown one after the other when the softkey is pressed.
» «
Speak
»
Announcement
«
only

Setting the call signal duration

s
Press the
Active after:
you wish the answering machine take the call. The various options are shown one after
the other when the softkey is pressed.
» «, »
0 sec
«, »
sec 60 sec

Selecting an announcement

s
Press the softkey»
If several announcements are available you can display all saved announcements one af-
ter the other by pressing the »
hear the selected announcement over the speaker or the handset of the telephone.
For example:»
MSN-1:Off
« softkey, a menu appears con-
«, to set the answering machine's mode of operation. The vari-
Speak
Firstthecallerhearsthesetannouncement, andcanthenleave amessageafter
the acoustic signal.
A caller hears only the set announcement and can not leave a message.
«softkey» to set the time interval (in seconds), after which
«, » «, »
2 sec 5 sec 10 sec
« or » «.
120 sec
« to select the announcement you wish a caller to hear.
Anncm. dial
Next announc.
«, »
Anncm.-1 Anncm.-2
Setting MSN-1:
«). The
Active after: 2 sec
Anncm. dial
Options for MSN-1
Sign-off:
Time-controlled:
Message length:
«, » «, »
15 sec 20 sec
« softkey. At the same time you can
«, ...., » « or »
Anncm.-9
English
Off
Speak
ON
Options
Off
Off
infini
«, » «, »
25 sec 30
«.
Anncm.-10
13