Horizon Fitness COMFORT 2.0 Benutzerhandbuch Seite 18

UPRIGHT BIKE ASSEMBLY
Comfort
Upright
Bike
COMFORT 2.0 SHOWN
18
NUT (C)
SPRING WASHER (I)
FLAT WASHER (B)
REAR STABILIZER
STEP 1
A Open HARDWARE FOR STEP 1.
B Attach the REAR STABILIZER to the MAIN
FRAME using 2 BOLTS (A), 2 FLAT WASHERS
(B), 2 SPRING WASHER (I) and 2 NUTS (C).
C Attach the FRONT STABILIZER to the MAIN
FRAME using 2 BOLTS (A), 2 FLAT WASHERS
MAIN FRAME
(B), 2 SPRING WASHER (I) and 2 NUTS (C).
Note: Lifting up the machine will help your assembly.
First put in place the stabilizer and then insert the bolts
FRONT STABILIZER
will also make your assembly easier.
BOLTS (A)
HARDWARE FOR STEP 1 :
HARDWARE FOR STEP 1
BOLT (A)
M8 X 56 MM
QTY: 4
NUT (C)
M8
QTY: 4
FLAT WASHER (B)
Φ9 XΦΦ20 X 2.0T MM
QTY: 4
SPRING WASHER (I)
M8 X 2.0T MM
QTY: 4