Horizon Fitness COMFORT 2.0 Benutzerhandbuch Seite 14

RECUMBENT BIKE ASSEMBLY
Comfort
R8.0
CONSOLE
CONSOLE CABLE
14
RIGHT CRANK ARM
RIGHT PEDAL
STEP 7
PRE-ASSEMBLED
SCREW
M5 X 7 MM
QTY: 4
A HARDWARE FOR STEP 7 is pre-installed.
B Attach the RIGHT PEDAL to the RIGHT CRANK
CONSOLE MAST
ARM, tightening it clockwise with the provided
PRE-ASSEMBLED
13mm/15mm flat wrench.
SCREW
C Attach the LEFT PEDAL onto the left crank arm,
tightening it counter-clockwise with the provided
13mm/15mm flat wrench. (NOTE: The left crank
arm is reversed threaded so it is very important that
it is tightened counter-clockwise. Tightening it the
opposite way can damage the pedal or the crank
LEFT PEDAL
arm or both.)
D Connect the CONSOLE CABLE and carefully tuck
into the CONSOLE MAST.
E Attach the CONSOLE to the CONSOLE MAST
using 4 PRE-ASSEMBLED SCREWS.
Note: You may need a 15mm wrench to assemble the
pedal. Please be care not to pinch yourself when
assembling.
HARDWARE FOR STEP 7