General Description - Multiplex Power Peak Twin EQ-BID 1000W Bedienungsanleitung

2.

GENERAL DESCRIPTION

Both charge circuits work completely separate from each
other and can also be set individually. The Display is split for
each charge output, therefore only the most important char-
ging data will be simultaneously displayed. The display uses
a blue, backlit 128 x 64 pixel graphic LC-Display.
The menu navigation can be switched between german, eng-
lish or french languages.
The integrated Equalizer automatically balances the voltage level of the individual cells
during the charging process. The Equalizer current is approximately 300 mA and is suffici-
ent also for batteries with a capacity exceeding 5Ah.
For safety, the the temperatures of a pack can be monitored and displayed during the
charge process. Also, the cut off at a specific temperature can be preset and adjusted.
The required sensor is included. Additionally, the charger is equipped with all possible
protection devices, such as short circuit, polarity and over temperature protection. An error
message will be given optically and acoustically.
An important feature of the charger is the trend-setting battery Identification
System (BID). As the variety of different batteries is becoming ever more
diverse, each type of battery requires its "own", individual charging process.
It is easy to set up the charger incorrectly for a specific type of battery, resul-
ting in costly damage to the battery.
The revolutionary BID-System from Multiplex offers a brilliant solution for this problem. Each
battery will be fitted with a small, light BID chip/key. This stores all the relevant data to
charge and discharge the battery to the optimum. The BID-chip/key will connected to the
Power Peak ® Twin-EQ-BID to set the parameters. Simply press the 'Start' button, and the
charge or discharge process begins. No tiresome searching through menus for the set-up
parameters, maximum protection from mishandling, and storing of the relevant battery
data in the BID chip - those are the unique advantages of the BID system.
Since the essential information is stored in the BID chip, all
the data required for safe, optimum charging and discharging
is always available to the charger.<br/> The battery always
carries its own data with it - inside the BID chip. They are
also easily displayed on the charger. This function essentially
means that PC software and computer technology are not
required in order to obtain an up-to-date overview of the bat-
tery status. The large graphic-display makes programming particularly easy.
Operating Instructions
Power Peak ® Twin EQ-BID
5
39
# 30 8563