Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
Adjust drip tray to desired
cup size.
2
Remove the protective foil,
if present, from the capsule.
Open lever and insert capsule.
5
Beverage dispensed.
A
max
110 mm
With upper drip tray.
3
Adjust height of spout. Close
lever and press the beverage
button.
6
8
Open lever, capsule falls into
container.
B
max
160 mm
With lower drip tray.
4
Brewing in progress.
11
7
Off
To switch the machine o ,
briefly press the on/o but-
ton.
Prepare beverages
(e.g. espresso)
Risk of injury!
Do not reach into the capsule
insertion opening.
When the machine is not used,
it will switch o
cally depending on the presetting.
If necessary, use the on/o button
to re-activate and rinse the machine
(see page 13) before preparing new
drinks.
Important: do not insert the capsule
until the rinsing cycle has been com-
pleted.
The spout can be moved either
downwards or upwards with
the help of a sliding device (on both
sides of the spout).
Risk of scalding!
Very hot drink. Do not open
lever during the brewing process. Do
not reach under the spout.
Stop the brewing process by
pressing any button a second
time.
For hygienic reasons, rinse
the appliance once after each
beverage pouring.
EN
automati-
11
Werbung
Inhaltsverzeichnis
