Mounting and Connection Instructions
6.
Final mounting
Mounting is completed after the test run has been carried out successfully.
We recommend securing the fixing plate and the sensor housing by means of a suitable adhesive.
Finally the screw openings of the transmission unit and the sensor must be
covered by means of the supplied VdS sealing stickers!
7.
Technical data
Transmission distance between the housings
Lateral offset
Int. protection according to DIN 40 050/EN 60 529
Environmental class according to VdS
Operating temperature range
Colour
VdS approval in combination with the transmission unit slimline Item no. 032235.17
The locking sensor 032236.17
1999/5/EC Directive, if used for its intended use.
The EC-Declaration of Conformity can be downloaded from our homepage (Service / Download).
8.
Accessories
Item no. 030110
Dimensions (in mm)
IDENTLOC
complies with the essential requirements of the R&TTE
Surface mounted base for
Packaging unit = 12 pieces
Locking Sensor
2 mm to 10 mm
2 mm max.
IP 67
III
-25 °C to +60 °C
Traffic white (similar to RAL 9016)
slimline
sensors
13.1
slimline
2
15