Seite 1
Montageanleitung | Mounting Instructions Controller c300 Metallhalter-Set Controller c300 Metal bracket set...
Seite 2
0.5-1.0 Nm und festschrauben (Anziehdrehmoment = 0.5 - 1.0 Nm). Das Gerät ist nun gegen Erschütterungen und Vibrationen geschützt. Angaben zur Rüttelfestigkeit c300 Schwingung ohne montierten Metallhalter EN 61131-2 10x Sinus 10 ... 55 Hz, 0.35 mm je Achse mit montierten Metallhalter DIN EN ISO 3691-4 20x Sinus 10 ...
Seite 3
0.5-1.0 Nm the right and screw it tight (tightening torque = 0.5 - 1.0 Nm). The device is now protected against shocks and vibrations. Information on vibration resistance c300 Vibration without mounted metal holder EN 61131-2 10x sine 10 ... 55 Hz, 0.35 mm per axis...