General Notes; Intended Use; Safety Instructions - Kärcher BDS 43/Orbital C Originalbetriebsanleitung

Einschlägige EU-Richtlinien
2006/42/EG (+2009/127/EG)
2014/30/EU
2011/65/EU
Angewandte harmonisierte Normen
EN 60335-1
EN 60335-2-67
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 61000-3-2: 2014
EN 61000-3-11: 2000
EN 62233: 2008
Angewandte nationale Normen
-
Die Unterzeichnenden handeln im Auftrag
und mit Vollmacht des Vorstands.
H. Jenner
Chairman of the Board of Management
Dokumentationsbevollmächtigter: S. Rei-
ser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2020/03/01
Contents
General notes ....................................
Intended use ......................................
Safety instructions..............................
Environmental protection ................... 12
Accessories and spare parts.............. 12
Scope of delivery ............................... 12
Control elements................................ 12
Installation.......................................... 12
Initial startup....................................... 13
Operation ........................................... 14
Shutting down .................................... 15
Transport............................................ 15
Storage .............................................. 15
Care and service................................ 15
Troubleshooting guide........................ 15
Warranty............................................. 16
Technical data .................................... 16
EU Declaration of Conformity ............ 16
S. Reiser
Director Regulatory Affairs & Certification
11
11
11
English

General notes

Read these original operating
instructions and the enclosed
safety instructions before using the device
for the first time. Proceed accordingly.
Keep both books for future reference or for
future owners.

Intended use

Use the device only in accordance with the
information in these operating instructions.
 This device is suitable for commercial
use, e.g. in hotels, schools, hospitals,
factories, shops, offices, and rental com-
panies.
 Only use the device for cleaning hard
surfaces that are not sensitive to mois-
ture and not sensitive to polishing.
 Use the device only at an ambient tem-
perature between +5°C and +40°C.
 Do not use the device for cleaning fro-
zen floors (e.g. in cold stores).
 Only equip the device with original ac-
cessories and spare parts.
 Only use the device for cleaning indoor
floors or covered areas.
 Do not use the device for cleaning public
traffic routes.
 The device must not be used outdoors.
 Do not use the device in a corrosive en-
vironment.
 Never use the device in potentially ex-
plosive atmospheres.
 Only use the device on surfaces up to
the maximum gradient specified in the
"Technical data" section.

Safety instructions

Before using the device for the first time,
read and observe these operating instruc-
tions and the accompanying brochure:
Safety information for single disc ma-
chines, No. 5.956-659.0.
Symbols on the device
Danger of burns
Certain parts of the device be-
come hot during operation.
Do not touch parts marked like
this until they have cooled down.
11