Linea 2000 DOMO B3971 Gebrauchsanleitung Seite 59

4. When all phases have been completed, you will see the total duration of the program on the display.
The standard total duration is 3 hours. You can then start the set program by pressing the Start
button. If you press the start button while setting the phases, the programming will stop early.
If desired, you can also have this program start delayed; see 'Delayed programming'.
Program phases
Knead 1
Rest 1
Knead 2
Rest 2
Knead 3
Rise 1
Rise 2
Rise 3
Bake
Warming function
REMOVING THE KNEADING PADDLE BEFORE BAKING
You can remove the kneading paddle, after the dough has been kneaded for the last time.
1. Shortly press the 'start-pauze/stop' button to interrupt the baking process or disconnect the plug
from the power socket.
2. Open the lid and take out the bread pan. Take out the dough with floured hands and remove the
kneading paddle.
3. Place the dough back in the bread pan and close the lid.
4. Insert the plug into the power socket and press the 'start-pauze/stop' button. The program will be
continued.
TIME DELAY FUNCTION
You can program the machine so that the preparation will be completed at a time of your choice.
· Calculate the time difference between the time you start the program and the time you want the
preparation to be ready. The bread maker will automatically add the duration of the program cycles to
this.
· By pressing the keys, the time will increase or decrease by 10 minutes at a time.
· You will see the hourglass icon on the display.
· Delayed programming is not possible with kneading and baking. The program time will be adjusted if
you press the Time + and Time – buttons with these programs.
www.domo-elektro.be
Icon Default setting
0:10
0:03
0:05
0:10
0:20
0:42
0:40
0:00
0:50
1:00
Adjustable time lock
1-30 min.
0-30 min.
0-30 min.
0-30 min.
0-25 min.
0-60 min.
0-60 min.
0-60 min.
0-80 min.
0-60 min.
B3971
59