Selecting The Menu Language - Sony VPL-SX125 Kurzreferenz

Selecting the Menu Language

The factory setting for the language for displaying menus, messages, etc. is English.
To change the on-screen language, proceed as follows:
1
Plug in the AC power cord into a wall
outlet.
2
Turn on the projector.
/
Press the ? 1 key.
3
Press the MENU key to display the
menu.
If the display cannot be properly seen,
adjust the focus, size, and position of the
(page 10)
projected image
4
Select the menu language.
Press the V or v key to select the
1
MENU SETTING (
press the ENTER key.
Press the V or v key to select
2
"Language (
ENTER key.
8
GB
Selecting the Menu Language
.
) menu then
)" then press the
2 3
MENU SETTING
Status
Language
Menu Position
Start Up Image
Sel: Set:
Press the V/v/B/b key to select a
3
language, then press the ENTER
key.
5
Press the MENU key to turn off the
menu screen.
1
Input-A
On
English
Center
On
Back: Eixt: