Bestway Lay-Z-Spa Handbuch Seite 11

• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water
and bathers. Read the filled weight information on the
package.
• Please keep at least 1m clearance around the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
• Recommended to consult experts and/or local authorities to
apply local or national laws/regulations relating to childproof
fencing, safety barriers, lighting, and other safety
requirements.
• Do not put the cover on the ground or any other dirty
surface when not in place on the spa.
• When the spa is being used, the cover should be placed in
a clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
IMPORTANT: Because of the combined weight of the
Lay-Z-Spa, water, and users, it is extremely important that
the base where the Lay-Z-Spa is installed is smooth, flat,
level and capable of uniformly supporting the weight for the
entire time the Lay-Z-Spa is installed (not on the carpet or
other similar material). If the Lay-Z-Spa is placed on a
surface, which does not meet these requirements, any
damage caused by improper support is not covered under
the manufacturer's warranty. It is the responsibility of the
Lay-Z-Spa owner to assure the integrity of the site at all
times.
1. Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
11