Operation; Input Menus - Pilz PKB-M Bedienungsanleitung

www.dplusa.fr

Operation

PILZ
PKB-M

Input menus

I-Brake
XX.XAYYY
t-Brake
XXXs YYY
setting
Data
Password
LevelX
10
DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
Downloaded from www.Manualslib.com
Start display pre-installed ex-works
PKB-MS: version with automatic standstill detection
To save a different menu as the start display, select the menu using the
arrow keys and then press ESC and ENTER simultaneously. Confirm the
displayed message
Braking current - set value
XX.X Braking current in amps
YYY int: value to be set via keys
ext: value from remote control potentiometer
To switch between internal and external, go to input mode and press
ENTER and UP or DOWN simultaneously.
Braking time - set value
XXX Braking time in seconds
INF: Braking time infinity
YYY int: value to be set via keys
ext: value from remote control potentiometer
To switch between external and internal, go into the input mode and press
ENTER and UP or DOWN simultaneously.
Settings
If nothing else is recorded, settings are only possible with password
protection > Level0.
Password
X Current password protection
Level0 Only the set value setting for the braking current and braking
time is possible (without password)
Level1 increased setting options (password: PILZ)
In order to give the 4-digit password, switch to input mode and select the
characters using the arrow keys. Pressing ENTER moves you to the next
position.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
manuals search engine
N Save Y
with ENTER.
Menu
PKB-M, PKB-MS Operating Manual