DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
Downloaded from
www.Manualslib.com
1
0
1
0
1
0
1
(6-7)
0
1
0
1
0
1
0
t
t
t
1
2
V1
After safety time t
external brake contactor) and the brake contactor energises.
After safety time t
current I
flows to the motor via the terminals U-V .
B
After the set braking time t
detecting the standstill signal, or the set monitoring time has been
exceeded (brake until standstill) the thyristor is deactivated and safety
time t
starts.
V3
The brake contactor is de-energised after safety time t
the contacts 8-9 close, and once again the motor controlis enabled.
INFORMATION
If brake until standstill is used and infinity has been selected as the time,
the motor temperature or the time must be monitored externally.