Pilz PKB-M Bedienungsanleitung Seite 41

www.dplusa.fr
Safety
Times
tv1
XXX0ms
tv2
XXX0ms
Regulat.
Data
P-value
XXX
I-value
XXX
Boost-V
XXX
Boost-L
XXX
Ramp
XXX0ms
PKB-M, PKB-MS Operating Manual
DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
Downloaded from www.Manualslib.com
Safety times
XXX0 Safety times in milliseconds
tv1 Time between the motor contact de-energising and the brake
contact energising
tv2 Time between energising the brake contactor and firing the
thyristor
tv3 Time between firing the thyristor and the brake contactor de-
energising
tv4 Time between the brake contactor de-energising and enabling
the motor contactor
Control data
Proportional factor
XXX Control boost
Off: control switched off (current is no longer controlled!)
Integrated time
XXX Control integration time in milliseconds
Additional boost
XXX Control additional boost
Limits for additional boost
XXX percentage limits for the activation of the additional boost
(related to the control set value)
Example: With a preset set value of 10 A and a limit of 20 %, the additio-
nal boost is active as long as the real braking current is smaller than 8 A
or greater than 12 A.
Control ramp time
XXX Ramp time of the control in milliseconds x 10
Boost: The control starts with the preset firing point.
When braking starts the current set value goes up from 0 A to the set
value within the ramp time (soft brake start).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
manuals search engine
11