Setting Up The Receiving A300-Antenna - Luda Elektronik horseCam Bedienungsanleitung

9. Installing the receiving A300-antenna
Place the receiving A300-antenna on an outer wall of your home facing the stable, and point it
towards the transmitting A300-antenna. Use the 5m antenna cable to connect the antenna to the
videoLink.
1. Point the receiving A300-antenna
as exact as possible towards the
transmitting A300-antenna.
2. Screw the receiving A300-antenna
temporarily on to the wall you have
chosen with 1 or 2 screws.
3. Slide the shrink tube onto the antenna
cable (5m) without heating it.
4. Lead the antenna cable to the place
indoors where you will put the
videoLink. Be careful not to break the
cable, especially when mounting in cold
weather.
Downloaded from www.Manualslib.com
Receiving A300
INfOrMAtION
Place the antenna as illustrated above to obtain optimal picture quality.
Make sure there are no other objects such as a roof gutter or a pipe close to the
antenna, as it may decrease the image quality.
manuals search engine
5m
b
- 37 -
Transmitting A300
a
!
c
This step is done
after you have made
sure that you receive
interference-free
picture quality inside
your house.
DE
EN
ES FR
FI
SV
FR
IT
PL
SV