Introduction - Luda Elektronik horseCam Bedienungsanleitung

1. Introduction

Congratulations to your purchase of horseCam™ from LUDA Elektronik AB!
Your horseCam-solution provides safe supervision of your horses in your stable and in your trailer.
We hope that the horseCam-solution will be satisfactory to you and exceed your expectations.
Note that horseCam transmit on an open frequency and that the signal is not encrypted. This
means that the signal can be captured by another 2,4GHz device within the camera range.
The product is CE-certified which means that it fulfils all established rules and demands for usage
within the EU. The CE-certification further implies that the radiation level is below the established
radiation levels stated in the EMC directive 89/336/EEC and R&TTE directive (1999/5/EC).
We thank you for purchasing the horseCam-solution and we hope you'll easily get trough the
installation process. If questions arise during the installation, please read through the different
troubleshooting chapters and the FAQ chapter. If further questions arise you are very welcome to
contact our friendly customer support.
Before you start reading about the installation of your horseCam-solution we ask you to read
through chapter 2. Safety precautions / Important information.
For news on our product range or accessories to your horseCam-solution, please visit our
website: www.horsecam-europe.com
LUDA Elektronik AB
Downloaded from www.Manualslib.com manuals search engine
- 29 -
DE
EN
ES FR
FI
SV
FR
IT
PL
SV