Siemens SITRANS Probe LU Kurzanleitung Seite 10

Security: (P000: Lock)
Value stored in P069
other
* Factory setting for P069 is 1954: after a new value is entered and accepted, it becomes the
default setting.
Activating SITRANS Probe LU
Accessing a parameter
1.
2.
3.
4.
5.
6.
Page EN-8
Downloaded from www.Manualslib.com
Value
* Lock off: programming permitted
Lock activated: no changes permitted
Power up the instrument. SITRANS Probe LU starts in RUN mode.
Notes:
• Keep infrared devices such as laptops, cell phones, and PDA's, away from SITRANS
Probe LU to prevent inadvertent operation.
• The following instructions apply when using the Hand Programmer.
• Do not use the Hand Programmer at the same time as SIMATIC PDM, or erratic
operation may result.
• Press PROGRAM
PROGRAM to return to RUN mode.
• You do not need to key in initial zeros when entering a parameter number: for
example, for P005, key in 5.
Press PROGRAM then DISPLAY
PROGRAM mode.
Either use the ARROW keys
different parameter, or:
Press DISPLAY to open the Parameter Number
field.
Key in the desired parameter number followed by
ENTER .
For example: press then
The LCD displays the new parameter number and
value.
SITRANS Probe LU – QUICK START MANUAL
manuals search engine
Description
then DISPLAY to access PROGRAM mode, and press
, to activate
to scroll to a
.
PROGRAM Icon
Parameter Number
Parameter Value
current value
7ML19985QR81