Maintenance; Storage; Troubleshooting - Gardena smart Sensor Betriebsanleitung

5. MAINTENANCE

To clean / replace the
sensor tip:
To clean the sensor:

6. STORAGE

To put into storage:
Disposal:
(in accordance with
RL2012/19/EC):
Disposing of flat batteries:

7. TROUBLESHOOTING

For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.
Downloaded from www.Manualslib.com
Whenever the Sensor is relocated, the sensor tip should be
cleaned / replaced. The felt on the tip should not come into
contact with grease / oil.
v Clean sensor tip
If the felt becomes damaged, the sensor tip can be re­ordered from
GARDENA Service.
v Unscrew sensor tip
4
No caustic / abrasive cleaning agents should be used.
v Clean the sensor with a damp cloth (do not use solvent).
The unit must be stowed away from children.
1. To preserve the batteries, these should be removed
(see 3. INITIAL OPERATION).
2. Stow the Sensor in a dry area where it has protection from frost.
The unit must not be added to usual household waste.
Refer to local environmental laws for discarding.
v Important: Make sure that the unit is discarded through your
municipal recycling collection centre.
Please return flat batteries to a GARDENA dealer or dispose of them
properly at your nearest recycling centre.
Only dispose of batteries when they are flat.
In the event of faults, you can find FAQs at the following address:
http://www.gardena.com/en/support/product-support/
faq-common-questions/
manuals search engine
(4)
with clear water.
(4) and screw on new tip.
13