Sound And Illumination Effects - Panasonic SA-MAX4000 Bedienungsanleitung

MAX4000E.book Page 13 Tuesday, April 21, 2015 4:57 PM
Recording MP3 tracks
You can record MP3 tracks from:
• MP3 disc to or internal memory
USB B
• to or internal memory
USB A USB B
• to internal memory or vice versa
USB B
1
Prepare the source you want to record.
Record all Select "OFF PLAYMODE"
tracks (Z"Play menu").
Record a Select "1-ALBUM" or "1-TRACK"
specified (Z"Play menu").
album or track
2
Press [MEMORY REC 7/9] or [USB REC 7/9] to
start recording.
Stop recording Press [8].
Recording stops at the last fully
recorded track in the album. For
example, if you stop recording during
the fourth track, only the first three
tracks are recorded.
"NO FILE RECORDED" is shown if no
track is recorded.
Note:
• Some tracks can use a longer time to record.
• Some tracks cannot be recorded because of the condition
of the source.
•
When recording from an MP3 disc, the recorded file name
is different from the original file.
•
When recording from USB A , the recorded file name is the
same as the original file (maximum 32 characters).
Deleting the recorded tracks
1
MEMORY
Press [MEMORY] (main unit: [MEMORY/USB]) to
select "MEMORY".
USB B
Press [USB] (main unit: [MEMORY/USB]) to select
"USB B".
2
Press [R, T] to select the album.
3
Press [2] or [6] to select the track.
4
Press [EDIT MODE] to select the mode.
TRACK DEL Delete a single track.
ALBUM DEL Delete one album (maximum 999
tracks).
FORMAT Format the USB device.
ALL DEL Delete all albums in the internal
memory.
5
Press [OK].
The selected item to be deleted is shown.
6
Press [OK].
"SURE? NO" is shown.
7
Press [Y, U] to select "SURE? YES" and then
press [OK].
"WRITING" is shown.
To cancel, select "SURE? NO".
offset printing

Sound and illumination effects

Sound effects
Preset EQ
1
Press [EQ] (main unit: [LOCAL EQ]) to select
"PRESET EQ".
2
Press [R, T] to select the desired preset EQ
setting and then press [OK].
Or turn [MULTI CONTROL] to select the desired
preset EQ setting.
Manual EQ
1
Press [EQ] (main unit: [LOCAL EQ]) to select
"MANUAL EQ".
2
Press [R, T] to select the sound effect.
Or turn [MULTI CONTROL] to select the sound effect.
3
Press [Y, U] to select the setting and then press
[OK].
Or press [2/3] or [5/6] to select the
setting.
BASS/MID/TREBLE –4 to +4
SURROUND "ON SURROUND" or
"OFF SURROUND"
D.Bass
1
Press [D.BASS] to select "D.BASS LEVEL" or
"D.BASS BEAT".
To cancel, select "OFF D.BASS".
2
Press [R, T] to select the setting and then press
[OK].
Or turn [MULTI CONTROL] to select the setting.
Note:
D.BASS BEAT: This function emphasizes the attack level of
the drum beat and produces a punchy sound. Depending on
the track, the effect may be small.
Illumination effects
You can change the illumination effect on the system.
Press [ILLUMINATION] to select the desired effect.
COLOR Illuminate in one colour.
AUTO Illuminate in one colour. The colour changes
automatically.
OFF Cancel the effect.
You can also press [R, T] to select the next or previous
effect.
Using the main unit
Turn [ILLUMINATION].
13
13